Sekumatic™ FK

The efficient liquid for rinse aid in cleaning and disinfection devices as well as in bed and cart decontamination systems. Particularly well-suited for all metallic instruments, glass, bed frames, transport carts, containers and OR shoes. Shortens the drying time and allows spot-free drying of the wash item. Meets the requirements of AK-BWA.

Product Details

Well-suited for all metallic instruments, glass, bed frames, transport carts, containers and OR shoes.

  • Shortens drying time
  • Particularly material-compatible
  • Efficient dosing
Our performance Your advantage
Reduces the surface tension of water Shortens the drying time, thus saving energy. Allows spot-free drying of the wash item.
Formulation with lightly acidic pH value Protects the wash item and the machines from scale formation
Corrosion and water hardness inhibitors Usable at all water hardness levels High material protection for long value retention of machines and wash items

Application Areas

For surgical instruments, dental instruments, plastic implements and elastomers (from the areas of anesthesia, surgery and urology), bed frames, transport carts, containers, OR shoes and medical glass implements and lab glass. The product is low in foam, because it uses special low foam surfactants.


Dosing is done by means of the dosing pump of the automatic reprocessing machines or systems. Dosing quantity in cleaning and disinfection devices 0.3-1ml/l


Nicotinic surfactants, solubilizers, corrosion inhibitors, citric acid

Use (after commencement) Shelf life
In container
until the printed expiration date

Please note the following to ensure the correct storage of environmental hygiene and instrument disinfectants: The original containers (canisters, buckets or bottles) with the disinfectant concentrate (or powder) should be stored at temperatures below 25°C and kept dry and clean. A brief period below or above the given storage temperature (e.g. during transport) will not diminish the effectiveness. The containers are to be sealed tightly after each use. Please also take care that the concentrate remaining in the container is not contaminated when preparing the application solution.

Chemical- physical data
Density 20 °C 1.05 g / ml
pH value* (concentrate) 20 °C 2.1 – 3.1 
pH-value* (solution, 1ml/l in DM-water) 20 °C approx. 5

pH-value measurements under operating conditions always by using pH-meter with temperature compensation.


pikto_instrumente_maschinellRinse aid for medical devices




Please see below related offerings: